📦bkerler / mtkclient
← 返回首页
Mediatek Flash and Repair Utility
⚖️ GPL-3.0📅 创建于 2026-01-18🔄 更新于 2026-10-26
🔗 GitHub Python
本站解读

MediaTek 机型的刷机与修复工具,能做漏洞利用、读写 flash 这类官方工具不管的事。平台差异要注意:Windows 需装好官方 MediaTek 端口驱动与 usbdk 驱动;Linux 仅在用旧 kamakiri 时才需要打补丁的内核,读写 flash 不受此限。流程是先在命令行跑起脚本,再关机,按住音量加或音量减加电源键进入 brom 模式,识别到设备后松手。文档点名 MT6781、MT6789、MT6855、MT6886、MT6895、MT6983、MT8985 这批芯片改用名为 V6 的新协议。Python 编写,GPL-3.0 许可,衍生分发同样要开源并保留许可;文档有英文与中文版。能读能写意味着维修前可先整机备份再动分区。适合救砖、备份与研究 bootrom 的维修人员和逆向爱好者。1541 stars、313 forks。

上榜 1 天 · 首次上榜 2026-11-17 · 近 7 天 +12 star · 榜单最高 #13 · GPL-3.0

📄 仓库 README

在 GitHub 查看 ↗
来自 GitHub 仓库自述文件 · 版权归原作者所有
Language: 🇺🇸 🇨🇳

MTKClient

Logo

Just some mtk tool for exploitation, reading/writing flash and doing crazy stuff. For windows, you need to install the stock mtk port and the usbdk driver (see instructions below). For linux, a patched kernel is only needed when using old kamakiri (see Setup folder) (except for read/write flash).

Once the mtk script is running, boot into brom mode by powering off device, press and hold either vol up + power or vol down + power and connect the phone. Once detected by the tool, release the buttons.

MT6781, MT6789, MT6855, MT6886, MT6895, MT6983, MT8985

  • These chipsets use a new protocol called V6 and the bootrom is patched. You need to use the --loader option and a proper loader from the Loaders/V6 directory. Bootrom won't work, you need to use preloader mode (no hw buttons pressed, just connect). On some devices, preloader is deactivated, but you can reactivate it by running "adb reboot edl".

Credits

  • kamakiri [xyzz]
  • linecode exploit [chimera]
  • heapbait exploit [chimera], creds to [R0rt1z2],[Shomy]
  • Chaosmaster
  • Geert-Jan Kreileman (GUI, design & fixes)
  • All contributors

Installation

See linux/macos installation hints

See windows installation hints

See automated Windows installer

Usage

See usage instructions

Use Re LiveDVD (everything ready to go, based on Ubuntu):

User: user, Password:user (based on Ubuntu 22.04 LTS)

Live DVD V6

I have issues ....... please send logs and full console details !

  • Run the mtk tool with --debugmode. Log will be written to log.txt (hopefully)

Rules / Infos

Chip details / configs

  • Go to config/brom_config.py
  • Unknown usb vid/pids for autodetection go to config/usb_ids.py

Other Stuff

Learning resources

📈 近 7 天 Star 趋势

每日新增 Star(柱)与累计 Star(线)· 数据来自 GitHub

🏆 排名变化趋势

在各榜单中的排名历史(数字越小越靠前)

📋 历史上榜记录

每次快照的详细数据
日期 榜单 排名 周期新增 总 STAR