面向 iOS 18.0 至 27.0.1 的 Wallet 卡面换肤与锁屏密码主题工具,作者标注无需越狱。实现依赖 airlift 提供的 AirTraffic 同步漏洞,生效范围因此与系统版本强绑定:iOS 27.2 beta 1 与 beta 2 仍可工作,beta 3 起漏洞被 Apple 修补,刷入不再成功。文档提醒想继续使用的用户不要升级到 beta 3 或更新版本,并附兼容性表格逐条标注各版本状态与备注。适合在未越狱设备上更换银行卡样式、改锁屏输入界面外观的用户,前提是先核对自己的系统版本。对于已升级到 beta 3 的设备,文档用醒目提示劝阻升级,修补后刷入流程直接失效。以 MIT 许可发布,允许修改与再分发。首日 star 数超过七千,Swift 日榜排到第二位。
Apple Wallet Card Skinner & Lockscreen Passcode Themer (No Jailbreak Required)
Supports iOS 18.0 – 27.0.1 & iOS 27.2 beta 1–2 (iOS 27.2 beta 3+ patched)
Powered by theairliftAirTraffic sync exploit.
| iOS Version | Status | Notes |
|---|---|---|
| iOS 18.0 – 27.0.1 | ✅ Supported | Full support for Wallet skins and Lockscreen passcode themes |
| iOS 27.2 beta 1 – beta 2 | ✅ Supported | Working |
| iOS 27.2 beta 3+ | ❌ Patched | Apple patched the underlying airlift exploit. Flashing will not work. |
[!IMPORTANT] Do not update to iOS 27.2 beta 3 or newer if you want to continue using AirCard. The underlying AirTraffic sync exploit was patched by Apple in beta 3.
.passthm themes directly to iOS 18+ lockscreen.Wallet setup, detailed troubleshooting, multi-card workflows, theme creation, compatibility reporting, and local artwork preparation:
AirCard.dmg from Releases.AirCard.dmg and drag AirCard.app into your Applications folder.[!NOTE] First Launch on macOS (Gatekeeper): If macOS displays an unidentified developer prompt on first launch: - Method 1 (UI): Right-click (or Control-click)
AirCard.appin Applications ➔ click Open ➔ click Open. - Method 2 (Terminal):sh sudo xattr -cr /Applications/AirCard.app[!TIP] macOS Developer Tools / Python Requirement: AirCard uses macOS native Python 3 (
/usr/bin/python3). If macOS prompts that Developer Tools are required or if you recently installed/updated Xcode: - Install Command Line Tools:xcode-select --install- Accept Xcode license if applicable:sudo xcodebuild -license accept[!NOTE] Windows users: an unofficial Windows port is available at AirCard-Windows.
[!NOTE] Apple Card: The Apple Card (titanium/digital card) uses dynamic vector rendering based on your spending categories instead of static cached card skins. Custom skins apply to standard debit/credit cards, transit cards, and passes.
Scanned cards can now display names from this Mac's Wallet cache. Open Check missing cards to distinguish current-scan matches from membership entries and payment caches that still need confirmation. Use Reconnect for connection problems and Read Cache to reread local metadata.
For payment cards, AirCard uses the NFC activation event for the card you actually open. Wallet may also request artwork for several cards; IDs observed in those current iPhone log paths can appear in a batch. Once a live ID matches one specific remote-device cache, the remaining payment IDs from that same cache are included so cards omitted by iOS logging still appear. Saved IDs from an earlier run remain hidden until the current scan matches them again.
Cards and skin file paths are saved by ID separately for each iPhone, in stable local discovery order. Only IDs matched during the current scan, either live or through the live-ID-matched device cache, are shown or eligible to flash; saved records only restore their skin after revalidation. Cache counts are not the phone's total, and phone Wallet order is not synchronized. See card identification and diagnostics.
The scanner uses the iPhone's unified log service, including Info/Debug events. On iOS 18.6.2, the legacy log service can show Wallet activity while omitting the resource lookup messages that contain card identifiers.
Open Log and check for Connected to the unified device log stream, then
double-click the side button, authenticate, and tap or switch cards. If the log
reader stops, reconnect and unlock the iPhone, then start another scan. Values
that iOS replaces with <private> cannot be recovered by the scanner.
If your device previously connected but scanning found zero cards, please try this build and report whether it helps. Include your iPhone model, iOS version, macOS version, and the AirCard version or commit tested. Avoid posting full device logs or card identifiers. See scanner validation for the verified environment and remaining coverage.
.passthm file into the app (or click Choose .passthm File).[!TIP] Universal Language & Bold Text Support:
AirCard automatically expands and flashes custom keypad assets for all system locales (English, Ukrainian, Russian, Spanish, German, French, etc.) and generates both standard and Bold Text cache bitmaps (--whiteand--white-bold), ensuring your theme works regardless of your iOS language or accessibility display settings!
These resources are maintained by the community and are not affiliated with the AirCard project.
git clone https://github.com/mak5er/AirCard.git
cd AirCard
chmod +x build.sh
./build.sh
This builds universal binaries (arm64 + x86_64), bundles dependencies into build/AirCard.app, and outputs build/AirCard.dmg.
AirliftFFI.airlift (AirTraffic sync escape).If you find AirCard useful, you can support future development:
UQBm9KPhtMw-XVVjirUoa09wzrlyWsbeZhKfefl1Uw-qNZ-rTDkDMCyjYxgvkWUnQiF5Erk2RyPQMT6G1n0x0954dc491c502849d04956ef74634aa5931a08e8| 日期 | 榜单 | 排名 | 周期新增 | 总 STAR |
|---|